The Barton Clamseal is one of those products that once you see and you wonder why you haven't had one before. Inflatable device repair kits generally contain patches and a glue adhesive (which tends to perish in the tube) and the instructions for repair advise that surfaces must be clean and DRY!!!! Well what do you do when you punch a hole on your boat on a dark and wet night???
The Clamseal is used around the world by cruisinng yachties, military forces, and is offered as standard equipment by a number of life raft manufacturers in their repair kits. In Australia, we have also supplied the Clamseal to the Australian Defence Force and the Australian Antartic Division. A great product and so simple.
Trade enquiries welcome.
The award-winning, patented ClamSeal repairs inflatables fast, even when wet
The ClamSeal™ can instantly repair splits and tears up to 90mm (3 ½ ") in length without the use of any hand tools, or adhesive.
ClamSeal™ is a patented glue-less repair system and instantly repairs small tears or splits in inflatables above or below the waterline - regardless of the fact that the material may be wet.
The system works by using two half "shells" that screw together tightly, using the inflatable material itself as a water and air-tight seal. It is quick and easy to fit and effects an immediate repair which can keep you afloat until a more permanent repair can be made.
The ClamSeal™ can be carried as part of your emergency equipment on board. It can be used at sea, on shore; even underwater as no adhesive tape is involved. The clever mechanics of the ClamSeal™ design mean this simple product can keep you safetly afloat.
The ClamSeal™ has now become a permanent part of the safety kit on many RIBs around the world and is continuing to amaze those who have used them - an effective, low cost solution to an otherwise complicated problem.
ClamSeal™ is suitable for use on:
RIBs
Dingies
Liferafts
Buoyancy bags
Virtually any inflatable product
Open the ClamSeal™ and insert the base plate into the split. | |
Pull the plates of the ClamSeal™ together, across the split, using the lanyard. | |
With the 2 plates pulled together, simply hand-tighten the nut for a Clam-tight seal | |
Reinflate and your safe to continue on your way! |