Eastport Nesting Pram

nesting pram

Specifications

Model  Length  Hull Weight  Beam  Max Payload  Cockpit Size  Rowing Draft  Sailing Draft  Sail Area
Eastport Nesting Pram 7' 9"
2.36 m 
34 kg 122 cm 170 kg OPEN 12.7 cm 63.5 cm 42 sq ft.

Model Plans and manual* Wood Only Kit Base Kit Sailing Components
(Lug Rig)
Eastport Nesting Pram $170 $1295 $1765 $1275

For further information or to purchase plans or a kit set for the Eastport Nesting Pram please contact us.

"Dinghy" is derived from an old Hindi word for a sailing or rowing passenger vessel.  In English, a dinghy is a small rowing and sailing boat, often (but not necessarily) serving as a tender to a mother ship.

At Chesapeake Light Craft, "dinghy" means "Eastport Pram" and her larger sister, the Passagemaker Dinghy.  Both boats are champion tenders.  They can carry a decent load, don't take up much space, and they were designed to be rowed and towed.  They sail, too.

The Eastport Pram is 7'9", which is pretty small, but still not compact enough for storing aboard the smaller classes of cruising yachts.  If you need something with a tiny footprint, one choice is an inflatable.  Dinghy snobs like us refer to them as "deflatables."  They are heavy, expensive, prone to failure, and can't be rowed or sailed---so you're committed to carrying around an outboard and its fuel along with the soulless rubber bladder of the inflatable.  

So that leaves a nesting dinghy, and here's a very fine example. The Eastport Nesting Pram shares its hull with the stock Eastport Pram.  With some 800 of them built, it's probably one of the most popular dinghies in the world.  The Eastport Nesting Pram has a demountable front half which nests completely in the back half.  The "nested" package is a very manageable 4'9" x 4'0" rectangle.  It can be stowed on the decks of cruising yachts down to pocket-cruiser size.  Or, it can store in your apartment, your RV, your shed, or at the marina.  At a casual pace, the Eastport Nesting Pram takes one minute and 20 seconds to assemble or disassemble.  You'd need some sort of pyrotechnic device to inflate (or deflate) an inflatable dinghy that fast.

We spent a lot of time refining the Eastport Nesting Pram.  We were concerned that the only thing a lot of extant nesting dinghy designs do well is....nest.  We have kept all of the fun and function of the stock Eastport Pram---including the sailing rig---with no compromises for its nesting function.  The nesting version is still just as easy to build.  The Eastport Nesting Pram weighs 65 pounds, the same as the stock version.  Sailed and rowed against a standard Eastport Pram, it is just as fast.

Here's how it works.  If you don't need the sailing version, just order the "rowing kit."  This gives you the complete boat, ready to row.  The daggerboard trunk, for sailing, is INCLUDED in this version.  It'll be sealed off, but can be opened if the builder decides to convert to sailing later.

Builders who will go sailing will order the "Rowing Kit" AND the "Sailing Component Kit."  Adding the Sailing Component Kit gives you the mast, boom, yard, daggerboard, rudder, sail, mast step, and a center thwart that's integrated with the daggerboard trunk.  The sailing kit includes a proper plug so that you don't ship water through the daggerboard trunk while rowing or towing.

The Eastport Nesting Pram is built full-length, and only cut in half later.  (You have to build full-length so that you don't end up with a "kink" at the joint in the boat.  The Nesting Pram is so "fair" that even quite close up it's hard to discern that it's a nesting dinghy.)  At the joint are two very strong structural bulkheads.  Six stainless steel bolts with large, easy-to-handle wing nuts fasten front and back together.  The waterline is below the top of the bulkhead, so in theory it's impossible to ship water through the joint.  A rubber gasket is included, however, which truly seals the joint and helps protect the finish on the two parts.

Build this boat if:

  • You need an excellent rowing and sailing dinghy that packs in a small space.
  • You need a dinghy with a maximum payload of 375 pounds.
  • You want a perfect small sail trainer.

Builders also looked at:

Eastport Pram (Standard) | Passagemaker Dinghy 

nesting pram   nesting pram
     
nesting pram   nesting pram

 

Denman Marine specialises in custom wooden boat building and repair. We utilise both traditional methods such as carvel or clinker and modern methods such as strip planking, cold molding or clinker plywood.

We can custom build to any design - for example those by Iain Oughtred, David Payne, Paul Gartside, John Welsford, Mark Bowdidge, Francois Vivier, Atkin , Bolger B&B etc.

We are sole Australian agents for Swallow Boats(UK) including the BayRaider, the Australian importer and re-seller of the world renowned Bruynzeel BS1088 Gaboon Marine Plywood (Lloyds certified), Barton Marine products (UK) and Chesapeake Light Craft (USA).

Denman Marine Pty Ltd ATF | ABN: 54779786053 | 2888 Channel Highway Kettering, Tasmania 7155
Mobile: 0413765984 | Tel: 0362674660 | Fax: 0362674991 | Email: andrew@denmanmarine.com.au